fix yaml

Climate/bosch_bth-ra_control.yaml

@@ -6,6 +6,11 @@ blueprint:
     min_version: "2024.6.0"
   description: >
    Eine Automation zur automatischen Steuerung eines Bosch TRV Heizkörperthermostats.
+   
+   **Temperatur-Prioritätslogik:**
+   1. Alarm armed_away → Abwesenheitstemperatur
+   2. Aktiver Zeitplan → Temperatur aus Schedule
+   3. Fallback → Abwesenheitstemperatur
   domain: automation
   author: Me
   input:
@@ -27,7 +32,14 @@ blueprint:
               device_class: temperature
     sensor_sync_threshold:
       name: Sensor-Synchronisations-Schwellenwert
-      description: Minimale Temperaturdifferenz in °C, um eine Sensor-Synchronisation auszulösen (Default = 0.5°C). Temperatur wird weiterhin spätestens nach 25 Minuten synchronisiert.
+      description: >
+        Minimale Temperaturdifferenz in °C, um eine Sensor-Synchronisation auszulösen (Default = 0.5°C).
+        
+        **Synchronisation erfolgt bei:**
+        1. Differenz zwischen Sensor und TRV ≥ Schwellenwert
+        2. Sensor kreuzt Solltemperatur von unten (verhindert zu spätes Aufheizen)
+        3. Sensor kreuzt Solltemperatur von oben (verhindert Überhitzung)
+        4. Spätestens nach 25 Minuten ohne Änderung
       default: 0.5
       selector:
         number:
@@ -46,7 +58,9 @@ blueprint:
             - domain: input_boolean
     min_temperature:
       name: Minimale Temperatur
-      description: Minimale erlaubte Solltemperatur als Sicherheitsgrenze (Default = 15°C)
+      description: >
+        Minimale erlaubte Solltemperatur als Sicherheitsgrenze (Default = 15°C).
+        Alle berechneten Temperaturen werden auf diesen Minimalwert begrenzt (Clamping).
       default: 15
       selector:
         number:
@@ -57,7 +71,9 @@ blueprint:
           step: 0.5
     max_temperature:
       name: Maximale Temperatur
-      description: Maximale erlaubte Solltemperatur als Sicherheitsgrenze (Default = 28°C)
+      description: >
+        Maximale erlaubte Solltemperatur als Sicherheitsgrenze (Default = 23°C).
+        Alle berechneten Temperaturen werden auf diesen Maximalwert begrenzt (Clamping).
       default: 23
       selector:
         number:
@@ -146,7 +162,12 @@ blueprint:
                 - domain: alarm_control_panel
         away_temperature:
           name: Abwesenheitstemperatur
-          description: Temperatur die eingestellt wird, wenn der Alarm im Abwesendmodus ist (Default = 18°C)
+          description: >
+            Temperatur die verwendet wird, wenn der Alarm im Abwesendmodus ist oder kein Zeitplan aktiv ist (Default = 18°C).
+            
+            **Verwendung:**
+            - Primär: Alarm Control Panel im Modus 'armed_away' (höchste Priorität)
+            - Fallback: Wenn kein aktiver Zeitplan eine Temperatur liefert
           default: 18
           selector:
             number:
@@ -200,6 +221,10 @@ variables:
   # Konstanten
   temperature_change_tolerance: 0.4  # °C - Minimale Differenz für Temperaturänderung
   sensor_sync_max_age: 1499  # Sekunden (25 Minuten - 1 Sekunde) - Max Alter für Sensor-Sync
+  random_delay_max_seconds: 30
+
+  # Zufalls-Delay für climate.set_temperature
+  random_delay_seconds: "{{ range(0, random_delay_max_seconds + 1) | random }}"
   
   # Entity-Discovery
   remote_temperature_entity: >
@@ -225,22 +250,19 @@ variables:
   remote_temperature_last_change: >
     {{ states[remote_temperature_entity].last_changed if remote_temperature_entity_valid else none }}
   scheduled_temperature: >
-    {% set schedule_finder = namespace(current_temperature = none) %}
-    {% set selected_friendly_name = states(active_scheduler_selector) %}
-    {% if selected_friendly_name is not none and selected_friendly_name != 'unknown' %}
-      {% for schedule in radiator_schedules %}
-        {% if state_attr(schedule, 'friendly_name') == selected_friendly_name and states(schedule) == 'on' %}
-          {% set temp = state_attr(schedule, 'temp') %}
-          {% if temp is not none and temp | is_number %}
-            {% set schedule_finder.current_temperature = temp %}
-            {% break %}
-          {% endif %}
+    {% set selected = states(active_scheduler_selector) %}
+    {% if selected not in [none, 'unknown', ''] %}
+      {% for schedule in radiator_schedules if state_attr(schedule, 'friendly_name') == selected and is_state(schedule, 'on') %}
+        {% set temp = state_attr(schedule, 'temp') %}
+        {% if temp is not none and temp | is_number %}
+          {{ temp }}
+          {% break %}
         {% endif %}
       {% endfor %}
     {% endif %}
-    {{ schedule_finder.current_temperature }}
   
   # Temperatur-Berechnungen
+  # Priorität: 1. Alarm armed_away → away_temperature, 2. Aktiver Zeitplan → scheduled_temperature, 3. Fallback → away_temperature
   target_temperature: >
     {% if alarm_control_panel and is_state(alarm_control_panel, 'armed_away') %}
       {{ away_temperature }}
@@ -249,6 +271,7 @@ variables:
     {% else %}
       {{ away_temperature }}
     {% endif %}
+  # Begrenzt target_temperature auf den Bereich [min_temperature, max_temperature] (Clamping)
   safe_temperature: >
     {{ [min_temperature, [max_temperature, target_temperature | float(18)] | min] | max }}
   
@@ -257,6 +280,7 @@ variables:
     {{ safe_temperature is not none and safe_temperature | is_number }}
   is_temperature_change_needed: >
     {{ (safe_temperature | float(0) - state_attr(trv, 'temperature') | float(0)) | abs >= temperature_change_tolerance }}
+  # Synchronisation nötig wenn: 1) Differenz > Schwelle, 2) Sensor kreuzt Soll-Temp von unten, 3) Sensor kreuzt Soll-Temp von oben
   is_sensor_sync_needed: >
     {% set new_sensor_temp = states(temperature_sensor) | float(0) %}
     {% set target_temp = state_attr(trv, 'temperature') | float(0) %}
@@ -281,6 +305,7 @@ variables:
     {{ (state_attr(trv, 'temperature') | float(0) - safe_temperature | float(0)) | abs >= temperature_change_tolerance }}
   
   # Override Reset Berechnungen
+  # Konvertiert duration-Dictionary {hours, minutes, seconds} in Gesamtsekunden
   override_reset_duration_seconds: >
     {{ (override_reset_duration.hours | default(0) | int) * 3600 + 
        (override_reset_duration.minutes | default(0) | int) * 60 + 
@@ -289,6 +314,7 @@ variables:
     {{ states[setpoint_change_source_entity].last_updated if setpoint_change_source_entity_valid else none }}
   is_setpoint_manual: >
     {{ setpoint_change_source_entity_valid and states(setpoint_change_source_entity) == 'manual' }}
+  # Early exits: 1) Keine Änderung/Timeout=0 → false, 2) Nicht manuell → false, 3) Berechne Zeitdifferenz
   override_duration_exceeded: >
     {% if override_last_change == none or override_reset_duration_seconds == 0 %}
       false
@@ -328,7 +354,6 @@ triggers:
   - platform: state
     entity_id: !input alarm_control_panel
     from: "armed_away"
-    to: "disarmed"
     id: ALARM_DISARMED
   - platform: state
     entity_id: !input heating_period_switch
@@ -383,8 +408,10 @@ actions:
               - if:
                   - condition: template
                     value_template: >
-                      {{ is_valid_temperature and is_temperature_change_needed }}
+                      {{ is_valid_temperature and is_temperature_change_needed and is_state(window_detection_entity, 'off') }}
                 then:
+                  - delay:
+                      seconds: "{{ random_delay_seconds }}"
                   - service: climate.set_temperature
                     target:
                       entity_id: !input trv
@@ -437,11 +464,15 @@ actions:
               - service: switch.turn_off
                 target:
                   entity_id: "{{ window_detection_entity }}"
+              - delay:
+                  minutes: 1
               - if:
                   - condition: template
                     value_template: >
                       {{ is_valid_temperature and is_temperature_change_needed }}
                 then:
+                  - delay:
+                      seconds: "{{ random_delay_seconds }}"
                   - service: climate.set_temperature
                     target:
                       entity_id: !input trv
@@ -503,6 +534,8 @@ actions:
             - condition: template
               value_template: "{{ override_duration_exceeded }}"
             sequence:
+              - delay:
+                  seconds: "{{ random_delay_seconds }}"
               - service: climate.set_temperature
                 target:
                   entity_id: !input trv
@@ -531,8 +564,10 @@ actions:
               - if:
                   - condition: template
                     value_template: >
-                      {{ is_valid_temperature and is_temperature_change_needed }}
+                      {{ is_valid_temperature and is_temperature_change_needed and is_state(window_detection_entity, 'off') }}
                 then:
+                  - delay:
+                      seconds: "{{ random_delay_seconds }}"
                   - service: climate.set_temperature
                     target:
                       entity_id: !input trv