increase max queue

Climate/bosch_bth-ra_control.yaml

@@ -1,4 +1,5 @@
-mode: single
+mode: queued
+max: 10
 blueprint:
   name: Bosch BTH-RA Radiator Control
   homeassistant:
@@ -32,6 +33,28 @@ blueprint:
           multiple: false
           filter:
             - domain: input_boolean
+    min_temperature:
+      name: Minimale Temperatur
+      description: Minimale erlaubte Solltemperatur als Sicherheitsgrenze (Default = 15°C)
+      default: 15
+      selector:
+        number:
+          mode: box
+          min: 10.0
+          max: 20.0
+          unit_of_measurement: "°C"
+          step: 0.5
+    max_temperature:
+      name: Maximale Temperatur
+      description: Maximale erlaubte Solltemperatur als Sicherheitsgrenze (Default = 28°C)
+      default: 23
+      selector:
+        number:
+          mode: box
+          min: 20.0
+          max: 25.0
+          unit_of_measurement: "°C"
+          step: 0.5
     window_section:
       name: Fenster-/Türsensor Konfiguration
       description: Konfiguration für den Fenster-/Türsensor. 
@@ -73,13 +96,30 @@ blueprint:
       input:
         radiator_schedules:
           name: Heizpläne
-          description: Alle Heizpläne die für den Radiator berücksichtigt werden sollen. Sind mehrere Schedules aktiv, wird der erste mit einem gültigen Slot verwendet.
+          description: Alle Heizpläne die für den Radiator berücksichtigt werden sollen. Sind mehrere Schedules aktiv, wird der erste mit einer gültigen Temperatur verwendet.
           default: []
           selector:
             entity:
               multiple: true
               filter:
-                - domain: switch
+                - domain: schedule
+        
+        active_scheduler_selector:
+          name: Aktiver Scheduler Selector
+          description: >
+            Input Select der den aktuell aktiven Scheduler enthält (per Friendly Name).
+            Wird verwendet um zu bestimmen welcher Schedule für die Temperatur verwendet werden soll.
+            
+            **WICHTIG**: Die Options müssen die Friendly Names der Scheduler aus der Scheduler-Liste enthalten.
+            
+            **HINWEIS**: Wenn der angezeigte Scheduler inaktiv ist (off), wird automatisch
+            auf die Abwesenheitstemperatur zurückgegriffen.
+            
+            Beispiel: Wird typischerweise vom "Heizplan Selector" Blueprint gesteuert.
+          selector:
+            entity:
+              filter:
+                - domain: input_select
     away_section:
       name: Konfiguration für Abwesenheitsmodus
       description: Konfiguration für das Absenken der Heizung im Abwesenheitsmodus eines Alarmsystems
@@ -110,7 +150,10 @@ variables:
   temperature_sensor: !input temperature_sensor
   heating_period_switch: !input heating_period_switch
   radiator_schedules: !input radiator_schedules
+  active_scheduler_selector: !input active_scheduler_selector
   away_temperature: !input away_temperature
+  min_temperature: !input min_temperature
+  max_temperature: !input max_temperature
   alarm_control_panel: !input alarm_control_panel
   is_heating_period: >
     {% if heating_period_switch is none or heating_period_switch == '' %}
@@ -138,19 +181,18 @@ variables:
     {{ window_detection_entity_id.id }}
   scheduled_temperature: >
     {% set ns = namespace(current_temperature = none) %}
+    {% set selected_friendly_name = states(active_scheduler_selector) %}
+    {% if selected_friendly_name is not none and selected_friendly_name != 'unknown' %}
       {% for schedule in radiator_schedules %}
-      {% if states(schedule) == 'on' and state_attr(schedule, 'current_slot') is not none %}
-        {% set current_slot = state_attr(schedule, 'current_slot') %}
-        {% set actions = state_attr(schedule, 'actions') %}
-        {% if actions is not none and actions | length > current_slot %}
-          {% set action = actions[current_slot] %}
-          {% if action.data.temperature is defined and action.data.temperature | is_number %}
-            {% set ns.current_temperature = action.data.temperature %}
+        {% if state_attr(schedule, 'friendly_name') == selected_friendly_name and states(schedule) == 'on' %}
+          {% set temp = state_attr(schedule, 'temp') %}
+          {% if temp is not none and temp | is_number %}
+            {% set ns.current_temperature = temp %}
             {% break %}
           {% endif %}
         {% endif %}
-      {% endif %}
       {% endfor %}
+    {% endif %}
     {{ ns.current_temperature }}
   target_temperature: >
     {% if alarm_control_panel and is_state(alarm_control_panel, 'armed_away') %}
@@ -160,6 +202,55 @@ variables:
     {% else %}
       {{ away_temperature }}
     {% endif %}
+  safe_temperature: >
+    {% set temp = target_temperature | float(18) %}
+    {% if temp < min_temperature %}
+      {{ min_temperature }}
+    {% elif temp > max_temperature %}
+      {{ max_temperature }}
+    {% else %}
+      {{ temp }}
+    {% endif %}
+  is_valid_temperature: >
+    {{ safe_temperature is not none and safe_temperature | is_number }}
+  is_temperature_change_needed: >
+    {% set current = state_attr(trv, 'temperature') | float(0) %}
+    {% set new = safe_temperature | float(0) %}
+    {% set diff = new - current %}
+    {% if new > current %}
+      true
+    {% elif diff | abs >= 0.5 %}
+      true
+    {% else %}
+      false
+    {% endif %}
+  is_sensor_sync_needed: >
+    {% set current_remote_temp = states(remote_temperature_entity) | float(0) %}
+    {% set new_sensor_temp = states(temperature_sensor) | float(0) %}
+    {% set target_temp = state_attr(trv, 'temperature') | float(0) %}
+    {% set diff = (new_sensor_temp - current_remote_temp) | abs %}
+    {% if diff >= 0.5 %}
+      true
+    {% elif new_sensor_temp < target_temp and current_remote_temp >= target_temp %}
+      true
+    {% elif new_sensor_temp > target_temp and current_remote_temp <= target_temp %}
+      true
+    {% else %}
+      false
+    {% endif %}
+  scheduler_mismatch: >
+    {% set selected_friendly_name = states(active_scheduler_selector) %}
+    {% if selected_friendly_name not in ['unknown', '', none] %}
+      {% set found = namespace(value=false) %}
+      {% for schedule in radiator_schedules %}
+        {% if state_attr(schedule, 'friendly_name') == selected_friendly_name %}
+          {% set found.value = true %}
+        {% endif %}
+      {% endfor %}
+      {{ not found.value }}
+    {% else %}
+      false
+    {% endif %}
 
 triggers:
   - platform: state
@@ -200,6 +291,13 @@ triggers:
     entity_id: !input heating_period_switch
     to: "off"
     id: HEATING_PERIOD_OFF
+  - platform: state
+    entity_id: !input radiator_schedules
+    attribute: temp
+    id: SCHEDULE_TEMP_CHANGED
+  - platform: state
+    entity_id: !input active_scheduler_selector
+    id: SCHEDULER_CHANGED
 
 actions:
   - choose:
@@ -232,13 +330,13 @@ actions:
               - if:
                   - condition: template
                     value_template: >
-                      {{ target_temperature is not none and target_temperature | is_number }}
+                      {{ is_valid_temperature and is_temperature_change_needed }}
                 then:
                   - service: climate.set_temperature
                     target:
                       entity_id: !input trv
                     data:
-                      temperature: "{{ target_temperature | float }}"
+                      temperature: "{{ safe_temperature | float }}"
             alias: Heizperiode aktiviert - Setze Modus auf heat, synchronisiere Fensterstatus und Solltemperatur
           - conditions:
             - condition: trigger
@@ -289,13 +387,13 @@ actions:
               - if:
                   - condition: template
                     value_template: >
-                      {{ target_temperature is not none and target_temperature | is_number }}
+                      {{ is_valid_temperature and is_temperature_change_needed }}
                 then:
                   - service: climate.set_temperature
                     target:
                       entity_id: !input trv
                     data:
-                      temperature: "{{ target_temperature | float }}"
+                      temperature: "{{ safe_temperature | float }}"
             alias: Setze Fenster auf geschlossen und setze Solltemperatur auf Wert aus Zeitplan (wenn vorhanden)
           alias: Fensterstatus Änderung
         # temperature sensor sync
@@ -307,6 +405,8 @@ actions:
             - condition: template
               value_template: >
                 {{ temperature_sensor is defined and states(temperature_sensor) | is_number }}
+            - condition: template
+              value_template: "{{ is_sensor_sync_needed }}"
             sequence:
               - service: number.set_value
                 data:
@@ -323,34 +423,61 @@ actions:
                 {{ temperature_sensor is defined and states(temperature_sensor) | is_number }}
             - condition: template
               value_template: >
-                {{ (now() - states[temperature_sensor].last_changed).total_seconds() > 1199 }}
+                {{ (now() - states[remote_temperature_entity].last_changed).total_seconds() > 1499 }}
             sequence:
               - service: number.set_value
                 data:
                   value: "{{ states(temperature_sensor) | float }}"
                 target:
                   entity_id: "{{ remote_temperature_entity }}"
-            alias: Synchronisiere Temperatur am TRV (zeitbasiert, wenn länger als 20min unverändert)
+            alias: Synchronisiere Temperatur am TRV (zeitbasiert, wenn länger als 25min unverändert)
           alias: Temperatursynchronisation
-        # setze Solltemperatur basierend auf Alarm-Status
+        # setze Solltemperatur bei Schedule und Alarm-Status-Änderungen
         - choose:
           - conditions:
             - condition: trigger
               id:
                 - ALARM_ARMED_AWAY
                 - ALARM_DISARMED_AWAY
+                - SCHEDULE_TEMP_CHANGED
+                - SCHEDULER_CHANGED
+            - condition: template
+              value_template: >
+                {% if trigger.id == 'SCHEDULE_TEMP_CHANGED' %}
+                  {% set selected_friendly_name = states(active_scheduler_selector) %}
+                  {{ state_attr(trigger.entity_id, 'friendly_name') == selected_friendly_name }}
+                {% else %}
+                  true
+                {% endif %}
             sequence:
               - if:
                   - condition: template
                     value_template: >
-                      {{ target_temperature is not none and target_temperature | is_number }}
+                      {{ is_valid_temperature and is_temperature_change_needed }}
                 then:
                   - service: climate.set_temperature
                     target:
                       entity_id: !input trv
                     data:
-                      temperature: "{{ target_temperature | float }}"
-            alias: Setze Solltemperatur basierend auf Alarm-Status
-          alias: Solltemperatur setzen
+                      temperature: "{{ safe_temperature | float }}"
+              # Notification bei Scheduler-Mismatch
+              - if:
+                  - condition: template
+                    value_template: "{{ scheduler_mismatch and trigger.id == 'SCHEDULER_CHANGED' }}"
+                then:
+                  - service: persistent_notification.create
+                    data:
+                      title: "⚠️ Radiator Control - Scheduler nicht gefunden"
+                      message: >
+                        Der ausgewählte Scheduler '{{ states(active_scheduler_selector) }}' wurde nicht in der
+                        Scheduler-Liste gefunden.
+                        
+                        TRV '{{ state_attr(trv, 'friendly_name') }}' nutzt Fallback-Temperatur: {{ safe_temperature }}°C
+                        (Original: {{ target_temperature }}°C, Limits: {{ min_temperature }}-{{ max_temperature }}°C)
+                        
+                        Bitte Konfiguration überprüfen.
+                      notification_id: "radiator_control_scheduler_mismatch_{{ trv }}"
+            alias: Setze Solltemperatur
+          alias: Solltemperatur bei Änderungen
       alias: Aktionen während Heizperiode
     alias: Hauptsteuerung

Climate/schedule_selector.yaml

@@ -0,0 +1,268 @@
+blueprint:
+  name: Heizplan Selector basierend auf Kalenderereignissen
+  description: >
+    Wählt automatisch einen Heizplan basierend auf Kalenderereignissen aus.
+    
+    Der Blueprint überwacht einen Kalender und wechselt zwischen verschiedenen
+    Schedule-Helfern basierend auf Keywords im Event-Titel oder der Beschreibung.
+    
+    **WICHTIG**: Die Anzahl der Scheduler und Keywordlisten muss übereinstimmen!
+    Jede Zeile in den Keywordlisten entspricht einem Scheduler an der gleichen Position.
+    
+    Bei Event-Ende wird zum Standard-Scheduler zurückgekehrt, außer ein anderes
+    Event ist bereits aktiv.
+    
+    Required = *
+  domain: automation
+  homeassistant:
+    min_version: "2024.6.0"
+  author: Me
+  input:
+    calendar_section:
+      name: Kalender-Einstellungen
+      description: Kalender und zeitlicher Offset für Events
+      collapsed: false
+      input:
+        calendar_entity:
+          name: Kalender *
+          description: Der Kalender, der für Event-Erkennung überwacht wird
+          selector:
+            entity:
+              filter:
+                - domain: calendar
+        
+        event_offset:
+          name: Zeitlicher Offset
+          description: >
+            Optional: Zeitlicher Versatz für Event-Start und -Ende.
+            Beispiel: "-00:15:00" startet 15 Minuten vor dem Event.
+          default: "00:00:00"
+          selector:
+            duration:
+              enable_day: false
+    
+    scheduler_section:
+      name: Scheduler-Konfiguration
+      description: Schedule-Helfer und zugeordnete Keywords
+      collapsed: false
+      input:
+        scheduler_list:
+          name: Scheduler-Liste *
+          description: >
+            Liste der Schedule-Helfer (schedule entities).
+            Die Reihenfolge muss mit den Keywordlisten übereinstimmen!
+          selector:
+            entity:
+              multiple: true
+              filter:
+                - domain: schedule
+        
+        keyword_lists:
+          name: Keywordlisten *
+          description: >
+            Eine Keywordliste pro Zeile (komma-separiert).
+            Beispiel:
+            urlaub,vacation,holiday
+            homeoffice,wfh,remote
+            normal,standard
+            
+            **Position in der Liste = Position im Scheduler!**
+            Zeile 1 → Scheduler 1, Zeile 2 → Scheduler 2, etc.
+          selector:
+            text:
+              multiline: true
+              type: text
+        
+        default_scheduler:
+          name: Standard-Scheduler *
+          description: >
+            Dieser Scheduler wird aktiviert, wenn kein Keyword matched
+            oder ein Event endet (und kein anderes aktiv ist).
+          selector:
+            entity:
+              filter:
+                - domain: schedule
+    
+    helper_section:
+      name: Helper-Entity
+      description: Entity zum Speichern des aktiven Schedulers
+      collapsed: false
+      input:
+        helper_entity:
+          name: Input Select Helper *
+          description: >
+            Die input_select Helper-Entity, in die der aktive Scheduler geschrieben wird.
+            
+            **WICHTIG**: Die Options der input_select müssen vorbereitet werden!
+            Sie müssen die Friendly Names folgender Entities enthalten:
+            - Alle Scheduler aus der Scheduler-Liste
+            - Den Standard-Scheduler
+            
+            Beispiel Options:
+            ["Urlaub Heizplan", "Home Office Heizplan", "Normal Heizplan", "Standard Heizplan"]
+            
+            Die Blueprint schreibt den Friendly Name (nicht die Entity-ID) in die Helper-Entity.
+          selector:
+            entity:
+              filter:
+                - domain: input_select
+
+mode: single
+max_exceeded: silent
+
+triggers:
+  - platform: calendar
+    event: start
+    entity_id: !input calendar_entity
+    offset: !input event_offset
+    id: CALENDAR_START
+  
+  - platform: calendar
+    event: end
+    entity_id: !input calendar_entity
+    offset: !input event_offset
+    id: CALENDAR_END
+
+variables:
+  schedulers: !input scheduler_list
+  keywords_raw: !input keyword_lists
+  default_scheduler: !input default_scheduler
+  helper: !input helper_entity
+  calendar: !input calendar_entity
+  
+  # Keywords in Liste umwandeln (eine pro Zeile)
+  keyword_lists: >
+    {{ keywords_raw.split('\n') | select() | list }}
+  
+  # Bei Event-Start: Keywords matchen
+  matched_scheduler: >
+    {% set ns = namespace(scheduler = none) %}
+    {% if trigger.id == 'CALENDAR_START' %}
+      {% set event_text = (trigger.calendar_event.summary | lower) ~ ' ' ~ (trigger.calendar_event.description | default('') | lower) %}
+      {% for i in range(keyword_lists | length) %}
+        {% set keywords = keyword_lists[i].split(',') | map('trim') | map('lower') | list %}
+        {% set matched = namespace(found = false) %}
+        {% for keyword in keywords %}
+          {% if keyword in event_text %}
+            {% set matched.found = true %}
+          {% endif %}
+        {% endfor %}
+        {% if matched.found and i < (schedulers | length) %}
+          {% set ns.scheduler = schedulers[i] %}
+          {% break %}
+        {% endif %}
+      {% endfor %}
+    {% endif %}
+    {{ ns.scheduler }}
+  
+  # Bei Event-Ende: Prüfen ob ein anderes Event aktiv ist
+  other_event_active: >
+    {% if trigger.id == 'CALENDAR_END' %}
+      {% set start = state_attr(calendar, 'start_time') %}
+      {% set end = state_attr(calendar, 'end_time') %}
+      {% if start and end %}
+        {% set now_ts = now().timestamp() %}
+        {% set start_ts = as_timestamp(start) %}
+        {% set end_ts = as_timestamp(end) %}
+        {{ start_ts <= now_ts and now_ts <= end_ts }}
+      {% else %}
+        false
+      {% endif %}
+    {% else %}
+      false
+    {% endif %}
+
+conditions: []
+
+actions:
+  - choose:
+      # Event-Start: Scheduler aktivieren wenn Keyword matched
+      - conditions:
+          - condition: trigger
+            id: CALENDAR_START
+          - condition: template
+            value_template: "{{ matched_scheduler is not none and matched_scheduler != '' }}"
+        sequence:
+          - if:
+              - condition: template
+                value_template: >
+                  {{ state_attr(matched_scheduler, 'friendly_name') in state_attr(helper, 'options') }}
+            then:
+              # Matched Scheduler ist in Options vorhanden
+              - service: input_select.select_option
+                target:
+                  entity_id: !input helper_entity
+                data:
+                  option: "{{ state_attr(matched_scheduler, 'friendly_name') }}"
+            else:
+              # Matched Scheduler nicht vorhanden - Fallback auf Default
+              - if:
+                  - condition: template
+                    value_template: >
+                      {{ state_attr(default_scheduler, 'friendly_name') in state_attr(helper, 'options') }}
+                then:
+                  - service: input_select.select_option
+                    target:
+                      entity_id: !input helper_entity
+                    data:
+                      option: "{{ state_attr(default_scheduler, 'friendly_name') }}"
+                  - service: persistent_notification.create
+                    data:
+                      title: "⚠️ Heizplan Selector - Konfigurationsfehler"
+                      message: >
+                        Der gematchte Scheduler '{{ state_attr(matched_scheduler, 'friendly_name') }}' ({{ matched_scheduler }}) ist nicht in den Options der input_select '{{ helper }}' vorhanden.
+                        
+                        Fallback auf Standard-Scheduler '{{ state_attr(default_scheduler, 'friendly_name') }}' ({{ default_scheduler }}).
+                        
+                        Event: {{ trigger.calendar_event.summary }}
+                      notification_id: "schedule_selector_config_error"
+                else:
+                  # Auch Default-Scheduler nicht vorhanden
+                  - service: persistent_notification.create
+                    data:
+                      title: "❌ Heizplan Selector - Kritischer Konfigurationsfehler"
+                      message: >
+                        Weder der gematchte Scheduler '{{ state_attr(matched_scheduler, 'friendly_name') }}' ({{ matched_scheduler }}) noch der Standard-Scheduler '{{ state_attr(default_scheduler, 'friendly_name') }}' ({{ default_scheduler }}) sind in den Options der input_select '{{ helper }}' vorhanden.
+                        
+                        Kein Scheduler wurde aktiviert!
+                        
+                        Bitte input_select Options korrigieren.
+                        
+                        Event: {{ trigger.calendar_event.summary }}
+                      notification_id: "schedule_selector_critical_error"
+        alias: Event-Start - Scheduler aktivieren
+      
+      # Event-Ende: Zu Standard zurückkehren (nur wenn kein anderes Event aktiv)
+      - conditions:
+          - condition: trigger
+            id: CALENDAR_END
+          - condition: template
+            value_template: "{{ not other_event_active }}"
+        sequence:
+          - if:
+              - condition: template
+                value_template: >
+                  {{ state_attr(default_scheduler, 'friendly_name') in state_attr(helper, 'options') }}
+            then:
+              - service: input_select.select_option
+                target:
+                  entity_id: !input helper_entity
+                data:
+                  option: "{{ state_attr(default_scheduler, 'friendly_name') }}"
+            else:
+              - service: persistent_notification.create
+                data:
+                  title: "❌ Heizplan Selector - Konfigurationsfehler"
+                  message: >
+                    Der Standard-Scheduler '{{ state_attr(default_scheduler, 'friendly_name') }}' ({{ default_scheduler }}) ist nicht in den Options der input_select '{{ helper }}' vorhanden.
+                    
+                    Kein Scheduler wurde aktiviert!
+                    
+                    Bitte input_select Options korrigieren.
+                    
+                    Event: {{ trigger.calendar_event.summary }}
+                  notification_id: "schedule_selector_default_error"
+        alias: Event-Ende - Standard-Scheduler aktivieren
+    
+    default: []
+